|Recommended System Requirements|
|Game||APU A8-5550M Quad-Core||APU A8-4500M Quad-Core|
|Watch Dogs 2||245%||285%|
|Need For Speed||236%||275%|
|Forza Horizon 3||236%||275%|
In terms of overall gaming performance, the AMD APU A8-5550M Quad-Core is very slightly better than the AMD APU A8-4500M Quad-Core when it comes to running the latest games. This also means it will be less likely to bottleneck more powerful GPUs, allowing them to achieve more of their gaming performance potential.
The APU A8-5550M Quad-Core was released less than a year after the APU A8-4500M Quad-Core, and so they are likely to have similar levels of support, and similarly optimized performance when running the latest games.
The APU A8-5550M Quad-Core and the APU A8-4500M Quad-Core both have 4 cores, which is not likely to be a limiting factor for gaming.
More important for gaming than the number of cores and threads is the clock rate. Problematically, unless the two CPUs are from the same family, this can only serve as a general guide and nothing like an exact comparison, because the clock cycles per instruction (CPI) will vary so much.
The APU A8-5550M Quad-Core and APU A8-4500M Quad-Core are not from the same family of CPUs, so their clock speeds are by no means directly comparable. Bear in mind, then, that while the APU A8-5550M Quad-Core has a 0.2 GHz faster frequency, this is not always an indicator that it will be superior in performance, despite frequency being crucial when trying to avoid GPU bottlenecking. As such, we need to look elsewhere for more reliable comparisons.
Aside from the clock rate, the next-most important CPU features for PC game performance are L2 and L3 cache size. Faster than RAM, the more cache available, the more data that can be stored for lightning-fast retrieval. L1 Cache is not usually an issue anymore for gaming, with most high-end CPUs eking out about the same L1 performance, and L2 is more important than L3 - but L3 is still important if you want to reach the highest levels of performance. Bear in mind that although it is better to have a larger cache, the larger it is, the higher the latency, so a balance has to be struck.
The APU A8-5550M Quad-Core and the APU A8-4500M Quad-Core have the same L2 cache size, and neither CPU appears to have an L3 cache. They even have the same L1 cache size, so are identical in terms of cache size.
The maximum Thermal Design Power is the power in Watts that the CPU will consume in the worst case scenario. The lithography is the semiconductor manufacturing technology being used to create the CPU - the smaller this is, the more transistors that can be fit into the CPU, and the closer the connections. For both the lithography and the TDP, it is the lower the better, because a lower number means a lower amount of power is necessary to run the CPU, and consequently a lower amount of heat is produced.
Both the APU A8-5550M Quad-Core and the APU A8-4500M Quad-Core have the same TDP of 35 Watts, and were created with the same manufacturing size of 32 nm, which means they will affect your yearly electricity bill about equally.
The APU A8-4500M Quad-Core has an on-board GPU, which means that it will be capable of running basic graphics applications (i.e., games) without the need for a dedicated graphics card. The APU A8-5550M Quad-Core, however, does not, and you will probably have to look for a dedicated card if you wish to use it at all.
On-board GPUs tend to be fairly awful in comparison to dedicated cards from the likes of AMD or Nvidia, but as they are built into the CPU, they also tend to be cheaper and require far less power to run (this makes them a good choice for laptops). We would recommend a dedicated card for running the latest games, but integrated GPUs are improving all the time and casual gamers may find less recent games perform perfectly acceptably.
|MoBo Socket||Socket FS1||Socket FS1|
|Release Date||12 Mar 2013||15 May 2012|
|CPU Link||GD Link||GD Link|
|Clock Speed||2.1 GHz||vs||1.9 GHz|
|Max TDP||35 W||vs||35 W|
|Lithography||32 nm||vs||32 nm|
|L1 Cache Size||192 KB||vs||192 KB|
|L2 Cache Size||4096 KB||vs||4096 KB|
|L3 Cache Size||-||vs||-|
|ECC Memory Support||no||vs||no|
|Graphics||Radeon HD 7640G|
|Base GPU Frequency||-||vs||496 MHz|
|Max GPU Frequency||-||vs||-|
|Mini Review||APU A8-5550M Quad-Core is a fast-middle-class mobile processor based on the 32nm, Richland micro-architecture. |
It offers 4 Cores, initially clocked at 2.1GHz that go up to 3.1GHz, in Turbo Mode and 4MB of L2 Cache. It features integrated Graphics called Radeon HD 8550G which offer 256 Shader Processing Units and are substantially faster than previous Radeon HD 7640G. The max memory speed supported by the CPU is DDR3-1600. It consumes up to 35 Watt.
This CPU should only be paired with performance GPUs such as Radeon HD 7850M/GeForce GTX 660M.
|Fusion A8-4500M Quad Core is a 4 core fast middle-class mobile CPU based on the Trinity architecture and that features a Radeon HD 7640G GPU clocked at 497 MHz (655 MHz in Turbo mode) with 256 Pipelines. |
Unfortunately, benchmarks indicate the performance falls behind all Intel i5, i7 and most i3 CPUs. Still, it should be enough to run the most demanding games at decent settings, paired with the appropriate GPU.