Select any two CPUs for comparison
VS

CPU Core Details

CPU Codename Sandy Bridge Allendale
MoBo Socket LGA 1155/Socket H2 LGA 775/ Socket T
Notebook CPU no no
Release Date 02 Sep 2012 01 May 2007
CPU Link GD Link GD Link
Approved

CPU Technical Specifications

CPU Cores 1 2
Clock Speed 1.9 GHz 1.8 GHz
Turbo Frequency - -
Max TDP 35 W 65 W
Lithography 32 nm 65 nm
Bit Width - -
Virtualization Technology no no

CPU Cache and Memory

L1 Cache Size 64 KB 128 KB
L2 Cache Size 256 KB 1024 KB
L2 Cache Speed - -
L3 Cache Size 1.5 MB -
Memory Types
ECC Memory Support no no

CPU Graphics

Integrated Graphics no no

CPU Mini Review

Mini Review Sandy Bridge is the codename for a microarchitecture developed by Intel beginning in 2005 for central processing units in computers to replace the Nehalem microarchitecture. Intel demonstrated a Sandy Bridge processor in 2009, and released first products based on the architecture in January 2011 under the Core brand. The Intel Pentium Dual-Core brand refers to mainstream x86-architecture microprocessors from Intel. With the exception of a few early Yonah based mobile models, they are now all based on the 64-bit Core microarchitecture. Pentium Dual-Core lacks the SSE4.1 instruction found in the 45 nm Core 2 processors.

Gaming Performance Comparison

In terms of overall gaming performance, the Intel Celeron G465 1.9GHz is very slightly better than the Intel Pentium Dual Core E2160 1.80GHz when it comes to running the latest games. This also means it will be less likely to bottleneck more powerful GPUs, allowing them to achieve more of their gaming performance potential.

Both the Celeron G465 1.9GHz and the Pentium Dual Core E2160 1.80GHz were released at the same time, so are likely to be quite similar.

The 2 has 1 more core than the Celeron G465 1.9GHz. However, while the 2 will probably perform better than the Celeron G465 1.9GHz, both CPUs are likely to struggle with the latest games, and will almost certainly bottleneck high-end graphics cards. { Both CPUs also have quite low clock frequencies, which means recent games will have to be played at low settings, assuming you own an equivalently powerful GPU.

More important for gaming than the number of cores and threads is the clock rate. Problematically, unless the two CPUs are from the same family, this can only serve as a general guide and nothing like an exact comparison, because the clock cycles per instruction (CPI) will vary so much.

The Celeron G465 1.9GHz and Pentium Dual Core are not from the same family of CPUs, so their clock speeds are by no means directly comparable. Bear in mind, then, that while the Celeron G465 1.9GHz has a 0.1 GHz faster frequency, this is not always an indicator that it will be superior in performance, despite frequency being crucial when trying to avoid GPU bottlenecking. As such, we need to look elsewhere for more reliable comparisons.

Aside from the clock rate, the next-most important CPU features for PC game performance are L2 and L3 cache size. Faster than RAM, the more cache available, the more data that can be stored for lightning-fast retrieval. L1 Cache is not usually an issue anymore for gaming, with most high-end CPUs eking out about the same L1 performance, and L2 is more important than L3 - but L3 is still important if you want to reach the highest levels of performance. Bear in mind that although it is better to have a larger cache, the larger it is, the higher the latency, so a balance has to be struck.

The <span class='gpu2Mention'>Pentium Dual Core</span> has a 768 KB bigger L2 cache than the <span class='gpu1Mention'>Celeron G465 1.9GHz</span>, and although the Pentium Dual Core does not appear to have an L3 cache, its larger L2 cache means that it wins out in this area.

The maximum Thermal Design Power is the power in Watts that the CPU will consume in the worst case scenario. The lithography is the semiconductor manufacturing technology being used to create the CPU - the smaller this is, the more transistors that can be fit into the CPU, and the closer the connections. For both the lithography and the TDP, it is the lower the better, because a lower number means a lower amount of power is necessary to run the CPU, and consequently a lower amount of heat is produced.