Select any two CPUs for comparison
VS

CPU Core Details

CPU Codename Sossaman Deschutes
MoBo Socket Socket 478/Socket N Slot 1/SC242
Notebook CPU no no
Release Date - 24 Aug 1998
CPU Link GD Link GD Link
Approved

CPU Technical Specifications

{
CPU Cores 1 1
Clock Speed 1.66 GHz 0.45 GHz
Turbo Frequency - -
System Bus 667 MHz 100 MHz
Max TDP 27 W 271 W
Lithography 65 nm 250 nm
Bit Width 32 Bit 32 Bit
Voltage Range 1.1125-1.25V KB 2.0V KB
Max Temperature 100°C 90°C
Virtualization Technology yes no

CPU Cache and Memory

L1 Cache Size 64 KB 16 KB
L1 Cache Count 2 -
L2 Cache Size 1024 KB 512 KB
L2 Cache Speed - -
L3 Cache Size - -
Memory Types
ECC Memory Support no no

CPU Graphics

Integrated Graphics no no

CPU Mini Review

Mini Review The Celeron brand has been used by Intel for several distinct ranges of x86 CPUs targeted at budget personal computers. Celeron processors can run all IA-32 computer programs, but their performance is somewhat lower when compared to similar CPUs with higher-priced Intel CPU brands. For example, the Celeron brand will often have less cache memory, or have advanced features purposely disabled. These missing features have had a variable impact on performance. In some cases, the effect was significant and in other cases the differences were relatively minor. Many of the Celeron designs have achieved a very high bang for the buck, while at other times, the performance difference has been noticeable. This has been the primary justification for the higher cost of other Intel CPU brands versus the Celeron range. The Pentium II was basically a more consumer-oriented version of the Pentium Pro. It was cheaper to manufacture because of the separate, slower L2 cache memory. The improved 16-bit performance and MMX support made it a better choice for consumer-level operating systems, such as Windows 9x, and multimedia applications. Combined with the larger L1 cache and improved 16-bit performance, the slower and cheaper L2 cache's performance impact was reduced. General processor performance was increased while costs were cut.

Gaming Performance Comparison

In terms of overall gaming performance, the Intel Celeron 1.66GHz is marginally better than the Intel Pentium II 450MHz when it comes to running the latest games. This also means it will be less likely to bottleneck more powerful GPUs, allowing them to achieve more of their gaming performance potential.

Both the Celeron 1.66GHz and the Pentium II 450MHz were released at the same time, so are likely to be quite similar.

Both CPUs exhibit very poor performance, so rather than upgrading from one to the other you should consider looking at more powerful CPUs. Neither of these will be able to run the latest games in any playable way.

{ The Celeron 1.66GHz and the Pentium II 450MHz both have 1 cores, and so are quite likely to struggle with the latest games, or at least bottleneck high-end graphics cards when running them. With a decent accompanying GPU, theCeleron 1.66GHz and the Pentium II 450MHz may still be able to run slightly older games fairly effectively.

More important for gaming than the number of cores and threads is the clock rate. Problematically, unless the two CPUs are from the same family, this can only serve as a general guide and nothing like an exact comparison, because the clock cycles per instruction (CPI) will vary so much.

The Celeron 1.66GHz and Pentium II 450MHz are not from the same family of CPUs, so their clock speeds are by no means directly comparable. Bear in mind, then, that while the Celeron 1.66GHz has a 1.21 GHz faster frequency, this is not always an indicator that it will be superior in performance, despite frequency being crucial when trying to avoid GPU bottlenecking. In this case, however, the difference is probably a good indicator that the is superior.

Aside from the clock rate, the next-most important CPU features for PC game performance are L2 and L3 cache size. Faster than RAM, the more cache available, the more data that can be stored for lightning-fast retrieval. L1 Cache is not usually an issue anymore for gaming, with most high-end CPUs eking out about the same L1 performance, and L2 is more important than L3 - but L3 is still important if you want to reach the highest levels of performance. Bear in mind that although it is better to have a larger cache, the larger it is, the higher the latency, so a balance has to be struck.

The <span class='gpu1Mention'>Celeron 1.66GHz</span> has a 512 KB bigger L2 cache than the <span class='gpu2Mention'>Pentium II 450MHz</span>, but neither of the CPUs have L3 caches, so the <span class='gpu1Mention'>Celeron 1.66GHz</span> wins out in this area with its larger L2 cache.

The System Bus Speed is important for providing higher bandwidth, and with higher bandwidth the system has the capacity to move more data over a certain time period than it would with lower bandwidth.

The $higherFsb has a 567 MHz faster System Bus Speed than the <span class='gpu2Mention'>Pentium II 450MHz</span>, and as such, has a significantly higher limit when it comes to the size of the data being processed at once.

The maximum Thermal Design Power is the power in Watts that the CPU will consume in the worst case scenario. The lithography is the semiconductor manufacturing technology being used to create the CPU - the smaller this is, the more transistors that can be fit into the CPU, and the closer the connections. For both the lithography and the TDP, it is the lower the better, because a lower number means a lower amount of power is necessary to run the CPU, and consequently a lower amount of heat is produced.