Intel Pentium G4400 3.3GHz
vs
AMD FX-4300
vs
6
7
Select any two CPUs for comparison
VS

Gaming Performance Comparison

Recommended System Requirements
Game Pentium G4400 3.3GHz FX-4300
Call of Duty: Black Ops 4 68% 58%
Assassins Creed: Odyssey 86% 75%
PlayerUnknowns Battlegrounds 108% 96%
Forza Horizon 4 97% 86%
FIFA 19 13% 7%
Shadow of the Tomb Raider 126% 113%
Battlefield V 86% 75%
Grand Theft Auto VI 215% 197%
Fallout 76 146% 132%
Jump Force 94% 82%

In terms of overall gaming performance, the AMD FX-4300 is very slightly better than the Intel Pentium G4400 3.3GHz when it comes to running the latest games. This also means it will be less likely to bottleneck more powerful GPUs, allowing them to achieve more of their gaming performance potential.

The Pentium G4400 3.3GHz was released over a year more recently than the FX-4300, and so the Pentium G4400 3.3GHz is likely to have better levels of support, and will be more optimized for running the latest games.

Both CPUs exhibit very powerful performance, so it probably isn't worth upgrading from one to the other, as both are capable of running even the most demanding games at the highest settings (assuming they are accompanied by equivalently powerful GPUs).

The FX-4300 has 2 more cores than the Pentium G4400 3.3GHz. With 4 cores, the FX-4300 is much less likely to struggle with the latest games, or bottleneck high-end graphics cards when running them.

The FX-4300 has 2 more threads than the Pentium G4400 3.3GHz. Both CPUs have one thread per physical core.

Multiple threads are useful for improving the performance of multi-threaded applications. Additional cores and their accompanying thread will always be beneficial for multi-threaded applications. Hyperthreading will be beneficial for applications optimized for it, but it may slow others down. For games, the number of threads is largely irrelevant, as long as you have at least 2 cores (preferably 4), and hyperthreading can sometimes even hit performance.

More important for gaming than the number of cores and threads is the clock rate. Problematically, unless the two CPUs are from the same family, this can only serve as a general guide and nothing like an exact comparison, because the clock cycles per instruction (CPI) will vary so much.

The Pentium G4400 3.3GHz and FX-4300 are not from the same family of CPUs, so their clock speeds are by no means directly comparable. Bear in mind, then, that while the FX-4300 has a 0.5 GHz faster frequency, this is not always an indicator that it will be superior in performance, despite frequency being crucial when trying to avoid GPU bottlenecking. In this case, however, the difference is enough that it possibly indicates the superiority of the FX-4300.

Aside from the clock rate, the next-most important CPU features for PC game performance are L2 and L3 cache size. Faster than RAM, the more cache available, the more data that can be stored for lightning-fast retrieval. L1 Cache is not usually an issue anymore for gaming, with most high-end CPUs eking out about the same L1 performance, and L2 is more important than L3 - but L3 is still important if you want to reach the highest levels of performance. Bear in mind that although it is better to have a larger cache, the larger it is, the higher the latency, so a balance has to be struck.

The FX-4300 has a 3584 KB bigger L2 cache than the Pentium G4400 3.3GHz, which means that it, at worst, wins out in this area, and at best, will provide superior gaming performance and will work much better with high-end graphics cards.

The maximum Thermal Design Power is the power in Watts that the CPU will consume in the worst case scenario. The lithography is the semiconductor manufacturing technology being used to create the CPU - the smaller this is, the more transistors that can be fit into the CPU, and the closer the connections. For both the lithography and the TDP, it is the lower the better, because a lower number means a lower amount of power is necessary to run the CPU, and consequently a lower amount of heat is produced.

The Pentium G4400 3.3GHz has a 48 Watt lower Maximum TDP than the FX-4300, and was created with a 18 nm smaller manufacturing technology. What this means is the Pentium G4400 3.3GHz will consume significantly less power and consequently produce less heat, enabling more prolonged computational tasks with fewer adverse effects. This will lower your yearly electricity bill significantly, as well as prevent you from having to invest in extra cooling mechanisms (unless you overclock).

The Pentium G4400 3.3GHz has an on-board GPU, which means that it will be capable of running basic graphics applications (i.e., games) without the need for a dedicated graphics card. The FX-4300, however, does not, and you will probably have to look for a dedicated card if you wish to use it at all.

For in-depth GPU comparisons with the Intel HD Pentium G4400, click on the following GPU overview comparison icon (visible throughout Game-Debate), and choose a GPU from the list to compare against:

On-board GPUs tend to be fairly awful in comparison to dedicated cards from the likes of AMD or Nvidia, but as they are built into the CPU, they also tend to be cheaper and require far less power to run (this makes them a good choice for laptops). We would recommend a dedicated card for running the latest games, but integrated GPUs are improving all the time and casual gamers may find less recent games perform perfectly acceptably.

Can I Run It

Check any game system requirements

CPU Core Details

CPU CodenameSkylakeVishera
MoBo SocketLGA 1151Socket AM3+
Notebook CPUnono
Release Date01 Sep 201523 Oct 2012
CPU LinkGD LinkGD Link
Approved

CPU Technical Specifications

CPU Cores2vs4
CPU Threads2vs4
Clock Speed3.3 GHzvs3.8 GHz
Turbo Frequency-vs4 GHz
Max TDP47 Wvs95 W
Lithography14 nmvs32 nm
Bit Width64 Bitvs64 Bit
Max Temperature100°Cvs-
Virtualization Technologynovsno
Comparison

CPU Cache and Memory

L1 Cache Size128 KBvs192 KB
L2 Cache Size512 KBvs4096 KB
L3 Cache Size3 MBvs4 MB
Max Memory Size-vs-
Memory Channels-vs2
ECC Memory Supportnovsno
Comparison

CPU Graphics

GraphicsIntel HD Pentium G4400
Base GPU Frequency350 MHzvs-
Max GPU Frequency1000 MHzvs-
DirectX12.0vs-
Displays Supported-vs-
Comparison

CPU Package and Version Specifications

Package Size-vs-
Revision-vs-
PCIe Revision-vs-
PCIe Configurations-vs-

Gaming Performance Value

Performance Value

CPU Mini Review

Mini ReviewPentium G4400 3.3GHz is a budget processor based on the 14nm, Skylake Architecture.

It offers 2 Physical Cores (2 Logical), clocked at 3.3GHz and 3MB of L3 Cache.
Among its many features, Virtualization is activated.

The processor integrates Weak Graphics called Intel HD Pentium G4400, with 12 Execution Units, initially clocked at 350MHz and that go up to 1050MHz, in Turbo Mode which share the L2 Cache and system RAM with the processor.
Both the processor and integrated graphics have a rated board TDP of 47W.

It offers average performance. This means it will become a bottleneck in some demanding applications.
FX-4300 is a middle-class CPU based on the 32nm Piledriver architecture.

It offers 4 Physical Cores (4 Logical), initially clocked at 3.8GHz, which may go up to 4.0GHz and 4MB of L3 Cache.
Among its many features, Turbo Core and Virtualization are activated and the clock multiplier is unlocked, meaning it can be overclocked easily.

The processor DOES NOT integrated any graphics. and has a rated board TDP of 95W.

It offers average performance. It will therefore become a bottleneck in today's demanding games.