GeForce_GT_430_v2
Nvidia GeForce GT 430 v2

GD Rating

0
Check Prices
How well can the GeForce GT 430 v2 run games
Nvidia GeForce GT 430 v2
10 Aug 2021 - Graphics card reviewed

GeForce GT 430 v2 is capable of DirectX 11 gaming requirements.

How many years will the GeForce GT 430 v2 graphics card play newly released games and how long until you should consider upgrading the GeForce GT 430 v2 in your PC? Its upgrade time for the GeForce GT 430 v2, assuming you are a modern day gamer.

Whats a good PC graphics upgrade for the GeForce GT 430 v2? If you want an upgrade suggestion for the GeForce GT 430 v2 then a good choice would be RX 5000 Series Radeon RX 5500 4GB as this is better than 633 of the top 1000 most demanding game requirements with 1151% better performance as well. Alternatively if you want an upgrade suggestion for the GeForce GT 430 v2 then a good choice would be R-500 Series Radeon RX Vega 8 as this is better than 0 of the top 1000 most demanding game requirements with 339% better performance as well.
FPS System Benchmark
0 FPS
High
The GeForce GT 430 v2 was released on 11 Oct 2010
Nvidia PC game performance check GeForce GT 430 v2
GPU
Architecture
Fermi GF108-400-A1
Process
40nm
TMUs
16
Texture Rate
11 GTexel/s
ROPs
4
Pixel Rate
3 GPixel/s
Shader Processing Units
(CUDA Cores)
Ray Tracing
Tensor Cores
Release Price
Compatibility
Direct X
DX 11
Shader
5.0
Open GL
4.2
Resolution (WxH)
2560 x 1600
Notebook GPU
SLI/Crossfire
Dedicated
Integrated
Memory
Memory
2048MB
Memory Speed
900MHz
Memory Bus
128bit
Memory Type
DDR3
Memory Bandwidth
28.8GB/sec
L2 Cache
256
Display Connectors
VGA Connection
1
DVI Connection
1
HDMI Connection
1
DisplayPort Connection
Clock Speeds
Core Speed
700 MHz
Power
Max Power
60 Watts
PSU
350 Watt & 26 Amps
Power Connector
None
Recommended Hardware
Best RAM Match
4 GB
Best Resolution
1366 x 768
GPU Upgrade
GD Official
GD RATING
0
Approved

GeForce GT 430 v2 Game Requirement Analysis

Overview
GeForce GT 430 v2 is an OEM only middle-class Graphics Card based on the first revision of the Fermi Architecture.

Architecture
The Fermi Architecture is manufactured with a 40nm technology and uses a technique known as Hot Clocking: The Shaders are clocked twice as fast as the Central Unit. While this leads to a reasonable performance boost, it causes enormous amounts of energy dissipation, leading, ultimately, to a significantly higher operating temperature.
Fermi is also the first GPU architecture with fully cached memory access which increases memory performance.

GPU
It equips a GPU Codenamed GF108-400-A1 which has 2 Stream Multiprocessors activated and thus offers 96 Shader Processing Units, 16 TMUs and 4 ROPs. The Central Unit is clocked at 700MHz.

Memory
The GPU accesses a 1GB frame buffer of DDR3, through a 128-bit memory interface. The size of the frame buffer is exaggerated and in no way benefits the GPU. The Memory Clock Operates at 900MHz.

Features
DirectX 11.0 Support (11.0 Hardware Default) and support for 3D Vision Surround, PhysX, Realtime Raytracing and other technologies.

Cooling Solution
The Cooling Solution consists of a Single-Fan.

Power Consumption
With a rated board TDP of 60W, it requires at least a 300W PSU and it relies entirely on the PCI Slot for power, meaning no extra connectors are required.

Performance
Gaming benchmarks put its performance around of a Radeon HD 5570, meaning it is much faster than Radeon HD 5450.

System Suggestions
We recommend a modest processor (Intel Celeron) and 4GB of RAM for a system with GeForce GT 430.

Source [ Pip ]