GeForce_GT_630_v2
Nvidia GeForce GT 630 v2

GD Rating

0
Check Prices
How well can the GeForce GT 630 v2 run games
Nvidia GeForce GT 630 v2
10 Aug 2021 - Graphics card reviewed

DirectX 11 gaming system requirements will be met by this gpu.

How many years will the GeForce GT 630 v2 graphics card play newly released games and how long until you should consider upgrading the GeForce GT 630 v2 in your PC? You should definitely consider replacing this GeForce GT 630 v2 graphics card, if it is still in your gaming PC.

Whats a good PC graphics upgrade for the GeForce GT 630 v2? A good choice when looking to upgrade the GeForce GT 630 v2 would be the RX 5000 Series Radeon RX 5500 4GB which meets 633 of the 1000 top game’s recommended system requirements and has 923% better performance. Alternatively if you are thinking of upgrading this graphics card then we would currently suggest the R-500 Series Radeon RX Vega 8. This PC hardware upgrade performs 259% better and can run 0 of today’s 1000 most demanding PC games.
FPS System Benchmark
0 FPS
High
The GeForce GT 630 v2 was released on 15 May 2012
Nvidia PC game performance check GeForce GT 630 v2
GPU
Architecture
Fermi GF108-400-A1
Process
40nm
TMUs
16
Texture Rate
13 GTexel/s
ROPs
4
Pixel Rate
3 GPixel/s
Shader Processing Units
(CUDA Cores)
Ray Tracing
Tensor Cores
Release Price
$79
Compatibility
Direct X
DX 11
Shader
5.0
Open GL
4.2
Resolution (WxH)
4096 x 2160
Notebook GPU
SLI/Crossfire
Dedicated
Integrated
Memory
Memory
1024MB
Memory Speed
800MHz
Memory Bus
128bit
Memory Type
GDDR5
Memory Bandwidth
51.2GB/sec
L2 Cache
256
Display Connectors
VGA Connection
1
DVI Connection
1
HDMI Connection
1
DisplayPort Connection
Clock Speeds
Core Speed
810 MHz
Power
Max Power
65 Watts
PSU
300 Watt & 22 Amps
Power Connector
None
Recommended Hardware
Best CPU Match
Best RAM Match
8 GB
Best Resolution
1600 x 900
GPU Upgrade
GD Official
GD RATING
0
Approved

GeForce GT 630 v2 Game Requirement Analysis

Overview
GeForce GT 630 v2 is Middle-Class Graphics Card based on the first revision of the Fermi Architecture.

Architecture
The Fermi Architecture is manufactured with a 40nm technology and uses a technique known as Hot Clocking: The Shaders are clocked twice as fast as the Central Unit. While this leads to a reasonable performance boost, it causes enormous amounts of energy dissipation, leading, ultimately, to a significantly higher operating temperature.
Fermi is also the first GPU architecture with fully cached memory access which increases memory performance.

GPU
It equips a GPU codenamed GF108-400-A1 which has 2 Stream Multiprocessors activated and thus offers 96 Shader Processing Units, 8 TMUs and 2 ROPs. The Central Unit is clocked at 810MHz.

Memory
The GPU accesses a 1GB frame buffer of fast GDDR5, through a 128-bit memory interface. The size of the frame buffer is adequate. The Memory Clock Operates at 800MHz.

Features
DirectX 11.0 Support (11.0 Hardware Default) and support for 3D Vision Surround, PhysX, Realtime Raytracing and other technologies.

Power Consumption
With a rated board TDP of 65W, it requires at least a 300W PSU and it relies entirely on the PCI Slot for power, meaning no extra connectors are required.

Performance
GeForce GT 630 v2 is essentially a fast GeForce GT 530.
Gaming benchmarks put its performance somewhat above the older GeForce GT 530.

System Suggestions
We recommend a Modest Processor (Intel Core i3) and 8GB of RAM for a system with GeForce GT 630 v2.

Source [ Pip ]